English 中文SitemapHelp
 Product Catalog
Test4-4
 
Test-3
 
test2
 
test-2-2
Cleaning Solutions
 
NTT Optical connector cleaner
Precision measurement equipment
 
Non-contact measurement systems
Semiconductor Wafer Metrology Systems
Tensile, Compression and Bending Systems
Optical Fiber Telecom test & Splicing Solutions
 
Fujikura Splicer
Optical Telecom Test
Fiber Clean and Inspection solutions
Patchcords Prodution Line
 
Ferrule
Equipment
Tool\Consumable
Optical Test Equipment
 
Optical Platform LTB-8
Portable Platform
DataCom 100G
OSA
10G/5G Bert
UV Curing & Bonding Solution
 
UV Adhesives
UV Curing System
Opto-Mechanical Automation System
Avago Laser
 
Chip/COC/TOCAN
TOSA/ROSA
VCSEL
Optical Communication Products
 
Commercial & Industrial Products
Crystal Oscillator
Passive Components
System Software
Products  
Fujikura 80S splicer
Fujikura 80S
Product Description:
The FSM-80S is core-to-core alignment single fiber splicer succeeding to FSM-60S. In addition to ruggedized concept, which 60S created, the 80S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor, and "built-in operation manuals" in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.

Applicable fibres
SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), 
NZDS (ITU-T G.655),Others
Fibre Count
Single
Cladding diameter
80 to 150祄
Coating diameter
100 to 1000祄
Fibre cleaved length
5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900
Actual average splice loss
0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS.
Splice time
7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode
Return loss
60dB or greater
Splicing modes
100 splicer modes are available
Splice loss estimate
Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate.
Attenuation splice function
Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an 
inline fixed attenuator
Storage of splice result
The last 2000 results to be stored in the internal memory.
Magnification
X / Y (300X magnification), or both X and Y simultaneously (160X magnification)
Viewing method
By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor
Tension test
1.96 to 2.25N
Operating condition
0-5000m above sea level, 0-95% RH and -10 to 50癈 respectively.
Tube heater
Built-in auto-start tube heater with 10 heating modes and up to 20 for reference
Tube heat time
13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available
Applicable protection 
sleeve length
60mm, 40mm and a series of micro sleeves.
No. of splice/heating 
with battery
200 times of splicing and heat shrinking under with BTR-09
Power supply
Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09
Terminals
USB2.0 ( Mini-B) for data and video signal transfer to PC.
Wind protection
Up to 15m/s wind velocity
Dimensions
146(W) x 159(D) x 150(H) mm
Including wind protector, monitor, and rubber protector
Excluding rubber foot
Weight
2.5 kg, with ADC-18 AC adaptor
2.7 kg, with BTR-09 battery
Electrode life
3000 arc-discharges

Home | About Us | Partners | Products | FAQ | Contact Us
ICP:2021025646
Copyright @ 2009 http://www.comstarcom.com All Rights Reserved