MT Ferrule Kits
US Conec manufactures durable, composite, Polyphenylene Sulfide (PPS) based thermoplastic ferrules available with up to 72 fiber holes that terminate 125 micrometer optical fiber. The alignment mechanism consists of two stainless steel guide pins that fit into precisely molded alignment holes. The ferrules are used in conjunction with US Conec’s industry hailed, MTP® brand, MPO type connectors; however, they are also suitable for custom designed passive or active fiber coupling packages. Fiber is secured to the ferrules with an optical connector grade thermal cure epoxy and can be polished with a variety of commercially available batch connector polishing machines. US Conec’s highly stable, PPS material allows preparation of fiber tip protrusion with reduced polishing time and force resulting in superior endface geometry control. US Conec’s MT ferrule is compliant with IEC Standard 61754-5.
Features
- High density; fiber pitch: 0.25mm
- Consistent optical performance for multimode (flat protruded polish) and single-mode (angled protruded polish)
- Extremely low hygroscopic material for exceptional environmental stability
- Mold marks to indicate fiber type and ferrule grade
 Product Data Sheet (English)
Specifications
|
MM MT Elite®
Multimode MT Ferrule |
Standard
Multimode MT Ferrule |
SM MT Elite®
Single-mode MT Ferrule |
Standard
Single-mode MT Ferrule |
| Insertion Loss |
0.1dB Typical (All Fibers)
0.35dB Maximum (Single Fiber)2,3 |
0.20dB Typical (All Fibers)
0.60dB Maximum (Single Fiber)2,3 |
0.10dB Typical (All Fibers)
0.35dB Maximum (Single Fiber)1,4 |
0.25dB Typical (All Fibers)
0.75dB Maximum (Single Fiber)1 |
Optical
Return Loss |
> 20dB |
> 20dB |
> 60dB (8° Angle Polish) |
> 60dB (8° Angle Polish) |
1 As tested per ANSI/EIA-455-171 Method D3
2 As tested per ANSI/EIA-455-171 Method D1
3 As tested with proposed encircled flux launch condition on 50um fiber and 850nm per IEC 61280-4-1
4 Compliant with proposed IEC 61755-3-31/GRADE B
Ordering Information
Product ID #
Product Name
Product Type
Drawing
MTF-4MM7-02
MT Ferrule Kit
MTF-12MM7-02
MT Ferrule Kit
MTFA-12SM5-02
MT Ferrule Kit
12958
MT Ferrule Kit
Not Available
MTFA-4SM5-02
MT Ferrule Kit
MTF-8MM7-02
MT Ferrule Kit
MTFA-8SM5-02
MT Ferrule Kit
|
