| ITEM |
SPECIFICATIONS |
| Applicable type of fibers |
SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU -T G.653), NZDS(ITU-T G.655)
and other single mode fibers including ITU-T G.657 fibers. |
| Fiber count |
Single |
| Applicable fiber dimensions |
Cladding diameter : 80 to 150µm
Coating diameter : 100 to 1000µm |
| Fiber setting and cleaved length |
Sheathe clamp A (Standard) : For coating dia. up to 250mm (8 to 16mm cleave), coating dia. of over 250mm(16mm cleave)
Sheathe clamp B(option) : For coating dia. up to 1000mm (8 to 16mm cleave)
Sheathe clamp C(option) : For 900mm dia. loose tube fiber (8 to 16mm cleave)
Fiber holder (option) : FH-60-250, FH-60-900 (10mm cleave) |
| Splicing modes |
Total 100 modes |
| Typical splice loss |
0.02dB with SM, 0.01dB with MM, 0.04dB with DS and 0.04dB with NZDS. (Measured by cut-back method relevant to ITU-T standard). |
| Return loss |
>>60dB |
| Splicing time |
Typical 9sec.with SM FAST, 10sec.with SM AUTO and 13sec.with AUTO modes with standard SM(ITU-T G.652). |
| Splice loss estimate |
Available |
| Attenuation splice function |
Intentional high splice loss of 0.1dB to 15dB ( 0.1dB step ) can be made for an in-line fixed attenuator. |
| Tube heater / heating time |
Built-in tube heater with 30 heating modes. / Typical 30sec with Fujikura FP-03. |
| Applicable protection sleeve |
60mm, 40mm and Fujikura FPS01 series. |
| Storage of splice result |
The last 2000 results to be stored in the internal memory. |
| Tension test |
1.96 to 2.25N |
| Operating condition |
0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively. |
| Storage condition |
0 to 95%RH and -40 to 80 degC respectively. Battery : -20 to 30 degC for long term. |
| Dimensions |
136W × 161D × 143H [mm] excluding rubber foot. |
| Weight |
2.3kg with AC adaptor ADC-13, 2.7kg with battery BTR-08. |
| Viewing method and display |
Two CMOS cameras and 4.1" color LCD monitor. |
| Fiber view and magnification |
X / Y (300X magnification), or both X and Y simultaneously (187X magnification). |
| Power supply |
Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08. |
| No.of splice cycles with battery |
Typical 160 cycles (splice / tube heat) with BTR-08. |
| Electrode life |
2500 arc-discharges |
| Terminals |
USB 1.1 (USB-MiniB type) connector for PC communication.
6-pin Mini-DIN connector for HJS-02/03 or SH-8S/R/C power supply. |
